How do I fix error code tE2 on a LG dryers?

1. undefined: Turn off the dryer and unplug from power. 2. undefined: Follow the same diagnostic steps as tE1. 3. undefined: Disconnect NA6 connector and short yellow and blue pins; if error clears check connector seating, if not replace main PCB. 4. undefined: Measure thermistor resistance and compare to Thermistor Table 1. 5. undefined: Replace thermistor if resistance is out of table range; otherwise check harness connectors for damage or loose pins.

LG Dryers

Error Code tE2

Thermistor of blower housing - Outlet thermistor open or shorted

Moderate

Address soon - your appliance may not work properly

Also displayed as: tE2

How to Fix

1
Turn off the dryer and unplug from power.
2
Follow the same diagnostic steps as tE1.
3
Disconnect NA6 connector and short yellow and blue pins; if error clears check connector seating, if not replace main PCB.
4
Measure thermistor resistance and compare to Thermistor Table 1.
5
Replace thermistor if resistance is out of table range; otherwise check harness connectors for damage or loose pins.

This Error Applies To

LG DLEX4200B Series Dryers

Service manual exact match: DLGX4201BService manual exact match: DLEX4000VService manual exact match: DLGX4001WService manual exact match: DLG3601BService manual exact match: DLEX4200BService manual exact match: DLGX4201VService manual exact match: DLEX4000WService manual exact match: DLE3600B+2 more

Related Error Codes

No power / power supply issue - electric dryer power cord not connected or house power supply incorrect

tE5

Steam water supply pump failure detected in test mode

Power supply wire connection wrong or loose (Black-White-Red)

NFC module open or shorted

d80

Exhaust ductwork approximately 80% blocked - FlowSense alert

Power failure - house fuse blown or circuit breaker tripped, or power outage occurred

NFC module type is wrong

d90

Exhaust ductwork approximately 90-95% blocked - FlowSense alert

Need more help with your LG dryers?