Error Code d80
Exhaust ductwork approximately 80% blocked - FlowSense alert
Moderate
Address soon - your appliance may not work properly
Also displayed as: d80
How to Fix
- 1
Do not use the dryer until exhaust system has been cleaned or repaired.
- 2
Check the outside dryer vent while dryer is operating to confirm there is strong airflow.
- 3
Inspect duct for kinks, crushes, excessive elbows, or excessive length.
- 4
Clean lint buildup from entire duct run.
- 5
Check vent hood for damage or lint clogging and ensure area around vent hood is clear.
- 6
If exhaust system is extremely long, have it rerouted to a shorter, straighter path.
- 7
Opening the door or pressing the POWER button will clear the indicator after the cycle ends.
This Error Applies To
LG DLEX4200B Series Dryers
Related Error Codes
No power / power supply issue - electric dryer power cord not connected or house power supply incorrect
Steam water supply pump failure detected in test mode
Thermistor of blower housing - Outlet thermistor open or shorted
Power supply wire connection wrong or loose (Black-White-Red)
NFC module open or shorted
Power failure - house fuse blown or circuit breaker tripped, or power outage occurred
NFC module type is wrong
Exhaust ductwork approximately 90-95% blocked - FlowSense alert