How do I fix error code EE on a LG dryers?

1. undefined: EE error only appears during diagnostic test mode. 2. undefined: Disconnect power for at least 60 seconds to allow controller to fully reset. 3. undefined: Restore power and re-enter diagnostic test mode. 4. undefined: If EE error persists, replace the main PCB/controller assembly. 5. undefined: When handling replacement controller, use anti-static wrist strap grounded to chassis to prevent ESD damage.

LG Dryers2017–present

Error Code EE

EEPROM error

Moderate

Address soon - your appliance may not work properly

Also displayed as: EE

How to Fix

1
EE error only appears during diagnostic test mode.
2
Disconnect power for at least 60 seconds to allow controller to fully reset.
3
Restore power and re-enter diagnostic test mode.
4
If EE error persists, replace the main PCB/controller assembly.
5
When handling replacement controller, use anti-static wrist strap grounded to chassis to prevent ESD damage.

This Error Applies To

LG DLEX7600BE Series Dryers (2017) (2017–present)

Service manual exact match: DLEX7600WEService manual exact match: DLGX7601BEService manual exact match: DLEX7600BEService manual exact match: DLGX7601VEService manual exact match: DLEX7600VEService manual exact match: DLGX7601WE

Related Error Codes

tE1

Thermistor of blower housing open or shorted

tE2

Thermistor of blower housing open or shorted (secondary)

Door switch abnormal

d90

FlowSense - ductwork 90-95% blocked

tE4

Thermistor of steam generator open or shorted

Power failure or incorrect power supply

Pump (DC motor) failure

Power supply wire connection wrong or loose (electric dryer only)

Need more help with your LG dryers?