Error Code E Od
Wi-Fi modem communication error between main MICOM and Wi-Fi modem
Moderate
Address soon - your appliance may not work properly
Also displayed as: E Od
How to Fix
- 1
Inspect all connectors between the display PCB and the Wi-Fi modem lead wire. Reseat any loose connectors.
- 2
With Wi-Fi function enabled, measure Display PCB output at CON101 Pin 2 ~ Pin 8: should be 5 V. If absent, replace Display PCB.
- 3
Measure CON101 Pin 4 ~ Pin 8: should NOT be 0 or 5 V. If stuck at 0 or 5 V, replace Display PCB.
- 4
Measure Wi-Fi modem PCB output at Pin 5 ~ Pin 6: should NOT be 0 or 5 V. If stuck, replace the Wi-Fi modem PCB.
- 5
If all signals are correct, explain to customer (possible network/router issue).
This Error Applies To
LG LRFGC2706S Series Refrigerators
Related Error Codes
Humidity sensor error — short-circuit or disconnection of humidity sensor
Freezer icemaker sensor error — short-circuit or disconnection of ice maker sensor
Freezer ice maker kit defect — malfunction of ice maker motor
Freezer sensor error — short-circuit or disconnection of freezer sensor
Defrost sensor error — short-circuit or disconnection of freezer defrost sensor
Defrost heater error — defrost sensor did not reach 40°F (5°C) within 80 minutes after defrost start
Freezer BLDC fan motor error — no feedback signal from fan motor for more than 65 seconds
Refrigerator sensor error — short-circuit or disconnection of refrigerator sensor