Error Code E Od
Wi-Fi PCB Abnormal — Wi-Fi PCB and Display PCB connection fail or Wi-Fi PCB defective (applies only for GID and Best models)
Moderate
Address soon - your appliance may not work properly
Also displayed as: E Od
How to Fix
- 1
Check loose connection between Wi-Fi PCB and Display PCB.
- 2
Inspect the Wi-Fi PCB connector and harness for damage.
- 3
Replace Wi-Fi PCB (P/N: EBR86421801) if connector is good but error persists.
- 4
If error persists after Wi-Fi PCB replacement, replace Display PCB.
This Error Applies To
LG LRSOC2306 Series Refrigerators
Related Error Codes
UV/Nano LED Module Error — Bad UV LED module or poor connection of display and UV module; caused when feedback signals are abnormal (OPTIONAL feature)
Water Tank Switch Error — Water tank not assembled correctly or water tank switch error (optional feature)
Freezer Sensor Abnormal — Freezer sensor short or open failure
Defrost Heater Abnormal — Defrost heater or thermal fuse short circuit or unplugged connector. Indicated 4 hours after trouble occurs.
Refrigerator Sensor Abnormal — Refrigerator sensor (upper part of refrigerator compartment) short or open failure
Defrost Sensor Abnormal — Defrost sensor short or open failure
Freezer Fan Motor Abnormal — Connection line of the fan motor is faulty, short or open. Display fault when operating fan motor for 65 seconds without feedback.
Ambient (Room) Temperature Sensor Abnormal — Room temperature sensor short or open