Error Code E Od
Wi-Fi modem error — defect of Wi-Fi modem PCB or poor communication connection between display MICOM and Wi-Fi modem
Moderate
Address soon - your appliance may not work properly
Also displayed as: E Od
How to Fix
- 1
Step 1: Check all connectors in display assembly and lead wire. If loose, reconnect housing.
- 2
Step 2: While Wi-Fi function is enabled, check Wi-Fi PCB output voltage. If NOT Not-0-or-5V (signal oscillating), replace Wi-Fi modem PCB.
- 3
Step 3: Check Display PCB output at CON101 2nd Pin ~ 8th Pin. If NOT 5V, change Display PCB.
- 4
Step 4: Check CON101 4th Pin ~ 8th Pin for data signal. If reads 0V or 5V (static), change Display PCB.
- 5
Step 5: If Display PCB outputs are correct and Wi-Fi modem output is abnormal, replace Wi-Fi modem.
- 6
Step 6: If all checks pass, explain to customer — Wi-Fi modem is functioning normally.
This Error Applies To
LG LRYXC2606 Series Refrigerators
Related Error Codes
Defect of freezer craft ice maker sensor — short-circuit or disconnection of craft ice maker sensor
Defect of Mini Cubed ice maker kit — malfunction of Mini Cubed ice maker motor
Defect of refrigerator sensor — short-circuit or disconnection of refrigerator sensor
Defect of freezer sensor — short-circuit or disconnection of freezer sensor
Defrosting failure — defrost sensor does not reach 40°F (5°C) within 80 minutes after defrost starts. Causes: disconnected thermal fuse, defective defrost heater, defective heater relay, drain tube blockage.
Defect of BLDC fan motor for freezer — no feedback signal from fan motor for more than 65 seconds
Defect of BLDC fan motor for ice compartment — no feedback signal from fan motor for more than 65 seconds. Causes: defect of BLDC motor connection, Drive IC, or TR.
Defect of BLDC fan motor for machine room — no feedback signal from condenser fan motor for more than 65 seconds