Error Code UE
Unbalance Error — load eccentricity exceeds allowable threshold; machine cannot proceed to spin.
Moderate
Address soon - your appliance may not work properly
What This Means
Laundry is gathered to one side in the drum; Load is too small; Washing machine installed at an angle (not level); Non-distributable items (such as single heavy items) placed in drum
How to Fix
- 1
Confirm UE is displayed.
- 2
Check if laundry is leaning toward one side in the drum. If YES → redistribute laundry evenly in drum assembly.
- 3
If laundry distribution is OK → check if washing machine is installed at an angle. If YES → adjust height of washing machine to be horizontal using leveling feet.
- 4
Installation checklist: remove all 4 transit bolts; confirm machine can handle two different types of blanket materials if bedding cycle is used.
- 5
After leveling, tighten all lock nuts against base of washer.
This Error Applies To
LG WM3460CW Series Washers (2019) (2019–present)
Related Error Codes
Wi-Fi Connection Error (LQC Test Mode only) — problem with connection between display PCB and Wi-Fi module.
Wi-Fi Module Error (LQC Test Mode only) — problem with Wi-Fi module itself.
Drain Error — machine has not fully drained within 10 minutes.
Overflow Error — water level frequency exceeds 21.3 kHz, indicating too much water in tub. Drain pump activates automatically when FE is displayed.
Water Inlet Error — correct water level (24.6 kHz) not reached within 8 minutes after water is supplied, or preset water level not reached within 20 minutes.
Power Failure — power was interrupted while machine was in operation and then restored rapidly.
Heating Error — thermistor is out of order or water temperature cannot be reached.
EEPROM Error — EEPROM on main board is out of order. Displayed only when START/PAUSE is first pressed in Load Test Mode.