Error Code tC
Your dryer's temperature sensor isn't reading correctly
Moderate
Address soon - your appliance may not work properly
Also displayed as: tC
What This Means
Clogged case filter restricting airflow and causing abnormal temperature readings; Thermistor 1 resistance out of range (open or shorted); Wiring harness fault between thermistor and main PBA
What actually causes this:
Usually a clogged lint screen or blocked exhaust vent — restricted airflow causes the sensor to misread temperatures.
First Thing to Check
Pull out the lint screen and clean off all the lint, then check that your exhaust vent hose isn't kinked or blocked.
Parts Involved
How to Fix
- 1
1. Clean the case filter thoroughly
- 2
2. Measure Thermistor 1 resistance: should be 50KOhm at 25C (77F)
- 3
3. Check wiring harness between Thermistor 1 and main PBA for loose or damaged connectors
- 4
4. If thermistor resistance is out of range, replace the thermistor
This Error Applies To
Samsung DV25B6800H Series Dryers (2024) (2024–present)
Related Error Codes
A secondary temperature sensor is giving bad readings
A fourth temperature sensor is reading abnormally
The compressor temperature sensor detected a problem
A third temperature sensor is giving incorrect readings
A fifth temperature sensor is reading incorrectly
The drum motor temperature sensor detected a problem
A button on the control panel is stuck or shorted
The heat pump compressor has stopped working