Error Code ICE-MAKER-FUNC-CUBED
Cubed ice maker has failed to harvest ice three times in a row
Moderate
Address soon - your appliance may not work properly
Also displayed as: Ice Maker Function Error (Cubed Ice)
What This Means
Ice maker motor failure; Ice maker mechanism jammed; Ice maker sensor out of range; Freezer temperature too warm
What actually causes this:
The cubed ice maker could not complete an ice-dropping cycle after three attempts, pointing to a jammed mechanism or failed motor.
First Thing to Check
Make sure the ice bucket is not overfilled and is seated correctly under the ice maker.
Parts Involved
How to Fix
- 1
Check freezer temperature (should be ≤ dropping temperature, default -17°C)
- 2
Check ice maker sensor (see ICE-MAKER-SENSOR-CUBED)
- 3
Attempt ice maker reset by turning ice maker off and back on
- 4
Replace ice maker assembly if failure persists after 3 attempts
This Error Applies To
Samsung DRF36C Series Refrigerators (2022) (2022–present)
Related Error Codes
Internal I/O expander chip on main board has a communication fault
External temperature sensor is unplugged or has failed
Freezer temperature sensor is disconnected or out of range
Freezer evaporator fan is not running when it should be
Freezer defrost sensor is disconnected or reading out of range
Condenser fan motor in the machine compartment is not running
Freezer defrost heater or safety cutout has failed or wiring is open
Fridge temperature sensor is disconnected or out of range