Error Code 4C2
The incoming water is too hot for the selected cycle
Moderate
Address soon - your appliance may not work properly
Also displayed as: 4C2
What This Means
Water temperature supplied through the dry valve during drying cycle exceeds 70°C; Water temperature sensed as higher than 50°C in Wool or Lingerie courses; Hot water supply connected to cold water inlet; Water heater set too high
What actually causes this:
The hot and cold water hoses are connected to the wrong inlets, or your water heater is set too high
First Thing to Check
Check that the cold water hose connects to the cold inlet and the hot water hose connects to the hot inlet
Parts Involved
How to Fix
- 1
1. Check which water supply hose is connected to which inlet — cold should go to cold
- 2
2. Verify home water heater temperature setting
- 3
3. Check if the water supplied for 1-minute drying is 0.3–0.4L as expected
- 4
4. Test actual water temperature at the inlet
This Error Applies To
Samsung WA50M7450A Series Washers (2018) (2018–present)
Related Error Codes
The washer's door release module isn't communicating properly
The washer's WiFi module isn't communicating properly
The washer can't tell how much water is inside
The washer's motor can't spin properly
The washer isn't getting water when it needs it
The washer can't pump the water out
The washer isn't getting enough electrical power
The washer is getting too much electrical power