Error Code 8C
The vibration sensor board has a problem
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C
What This Means
Main PBA wire connection error; PBA silver nano part malfunction; MEMS PBA is defective; Wire disconnection
What actually causes this:
A wire connector on the vibration sensor board came loose or the board itself failed
First Thing to Check
Unplug the washer for 5 minutes, then plug it back in and try again
Parts Involved
How to Fix
- 1
1. Check wire connections for disconnection
- 2
2. Replace the MEMS PBA
- 3
3. Check the main PBA wire connection — if the main PBA wire disconnection error or silver nano part malfunction, replace accordingly
This Error Applies To
Samsung WA50M7450A Series Washers (2018) (2018–present)
Related Error Codes
The washer's door release module isn't communicating properly
The washer's WiFi module isn't communicating properly
The washer can't tell how much water is inside
The washer's motor can't spin properly
The washer isn't getting water when it needs it
The incoming water is too hot for the selected cycle
The washer can't pump the water out
The washer isn't getting enough electrical power