Error Code AC3
The washer's door release module isn't communicating properly
Moderate
Address soon - your appliance may not work properly
Also displayed as: AC3
What This Means
Connector connections between DR Module and main PBA are incorrect or loose; DR Module has faulty soldering; Wire harness damage
What actually causes this:
A connector between the door release module and the main board is loose
First Thing to Check
Unplug the washer for 5 minutes, then plug it back in and try again
Parts Involved
How to Fix
- 1
1. Check the connector connections between the DR Module and main PBA carefully
- 2
2. Check for incorrect or loose connections
- 3
3. Remove the DR Module and check for any faulty soldering
This Error Applies To
Samsung WA50M7450A Series Washers (2018) (2018–present)
Related Error Codes
The washer's WiFi module isn't communicating properly
The washer can't tell how much water is inside
The washer's motor can't spin properly
The washer isn't getting water when it needs it
The incoming water is too hot for the selected cycle
The washer can't pump the water out
The washer isn't getting enough electrical power
The washer is getting too much electrical power