Error Code dE1
The door lock mechanism has an electrical problem
Moderate
Address soon - your appliance may not work properly
Also displayed as: dE1
What This Means
Door lock switch terminal connected incorrectly; Door lock switch terminal is broken; Intermittent electric wire leakage; Main PCB fault
What actually causes this:
The wiring to the door lock is damaged or the lock switch itself is broken
First Thing to Check
Try opening and firmly re-closing the door — listen for the lock click
Parts Involved
How to Fix
- 1
1. Check the door switch — if faulty, replace
- 2
2. Check the main PBA door sensing circuit
- 3
3. If faulty, replace
- 4
4. Check power wire connections and insulation state
This Error Applies To
Samsung WF42H5200A Series Washers (2014) (2014–present)
Related Error Codes
Your washer's main computer has a critical failure
Your washer is getting too much power from the outlet
The WiFi module in your washer lost its connection to the main board
The control panels inside your washer aren't communicating with each other
The display panel lost its connection to the main control board
One of the buttons on your washer is stuck
The water heater in your washer isn't working properly
Your washer door isn't closing or locking properly