Error Code BC2
A button on the control panel is stuck or pressed in
Moderate
Address soon - your appliance may not work properly
Also displayed as: BC2
What This Means
Switch jammed or stuck due to being pressed unevenly from deformation of control panel or button; Screws that hold the sub PBA in place are tightened too much; Button other than Power button is continually pressed for more than 30 seconds; Deformation of an internal plastic injection part; Screw for assembling the sub PBA is tightened too much
What actually causes this:
One of the buttons on the front panel got stuck — sometimes from moisture or spilled detergent
First Thing to Check
Press each button on the control panel to make sure none of them feel stuck or jammed
Parts Involved
How to Fix
- 1
1. Check if any button on the control panel is physically stuck
- 2
2. Check if the sub PBA mounting screws are overtightened
- 3
3. Inspect control panel for deformation
- 4
4. Release and re-press buttons to verify they spring back properly
This Error Applies To
Samsung WF45K6 Series Washers (2018) (2018–present)
Related Error Codes
The washer's motor controller lost communication with the main board
The washer's door lock mechanism isn't engaging properly
The washer's vibration sensor board has a problem
The washer's WiFi module lost communication with the main board
The washer's display screen lost communication with the main board
The incoming water is too hot for the delicate cycle you selected
Your washer is getting too much electrical power
The washer's door relay module lost communication with the main board