Error Code 8C1
The washer's vibration sensor detected a problem
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C1
What This Means
Excessive vibration detected by MEMS sensor; Unit not properly leveled; Main PCB fault
What actually causes this:
The washer isn't level on the floor or the shipping bolts from installation were never removed
First Thing to Check
Check if the washer rocks when you press on each corner — adjust the leveling legs until it is perfectly stable
Parts Involved
How to Fix
- 1
1. Check the unit for excessive vibration
- 2
2. Verify the washer is properly leveled
- 3
3. Replace Main PCB if vibration is within normal range
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung WF45R6100A Series Washers (2024) (2024–present)
Related Error Codes
The washer's motor can't spin the drum properly
The incoming water is too hot for delicate wash cycles
An internal circuit module can't communicate with the main board
The WiFi module can't communicate with the main board
The door lock mechanism won't engage
The washer detects the door opening while running
The washer's water heater isn't working properly
The washer has too much water in the tub and is overflowing