Error Code BC2
A button on the control panel is stuck or pressed in
Moderate
Address soon - your appliance may not work properly
Also displayed as: BC2
What This Means
Switch jammed or stuck due to uneven pressing from control panel deformation; Screws holding the sub PBA are tightened too much; Button other than Power button is continually pressed for over 30 seconds; Deformation of an internal plastic injection part; Sub PBA assembly screw tightened too much
What actually causes this:
One of the buttons on the control panel got stuck — sometimes from a spill that dried and made the button sticky
First Thing to Check
Press each button on the control panel to check if any feel stuck or don't spring back
Parts Involved
How to Fix
- 1
1. Check if any button on the control panel is stuck or jammed
- 2
2. Check whether the sub PBA screws are overtightened, causing panel deformation
- 3
3. Check for deformed internal plastic injection parts pressing on buttons
- 4
4. Loosen and re-tighten the sub PBA screws to proper torque
This Error Applies To
Samsung WF45R6100A Series Washers (2024) (2024–present)
Related Error Codes
The washer's motor can't spin the drum properly
The incoming water is too hot for delicate wash cycles
An internal circuit module can't communicate with the main board
The WiFi module can't communicate with the main board
The door lock mechanism won't engage
The washer detects the door opening while running
The washer's water heater isn't working properly
The washer has too much water in the tub and is overflowing