Error Code SUD
There are too many soap suds in the washer
Moderate
Address soon - your appliance may not work properly
Also displayed as: Sud / SUdS
What This Means
Too much detergent used; Wrong type of detergent (non-HE detergent used in HE washer); Detergent residue buildup in the tub
What actually causes this:
Too much detergent was used or the wrong type of detergent (non-HE) was used
First Thing to Check
Just wait — the washer is handling it automatically. It will finish removing the suds and then continue the cycle.
How to Fix
- 1
1. Wait for the washer to complete the foam removal process automatically
- 2
2. Check the type and amount of detergent being used
- 3
3. Run a Self Clean+ cycle to remove detergent residue
This Error Applies To
Samsung WF45R6100A Series Washers (2024) (2024–present)
Related Error Codes
The washer's motor can't spin the drum properly
The incoming water is too hot for delicate wash cycles
An internal circuit module can't communicate with the main board
The WiFi module can't communicate with the main board
The door lock mechanism won't engage
The washer detects the door opening while running
The washer's water heater isn't working properly
The washer has too much water in the tub and is overflowing