Error Code LC1
The washer detected moisture that may be from detergent overflow, not an actual leak
Moderate
Address soon - your appliance may not work properly
Also displayed as: LC1 (upper) / LC1 (lower)
What This Means
Detergent, softener, or bleach has overflowed the detergent case; Exterior of upper washer is cleaned with water; Leakage sensor triggered by external water
What actually causes this:
Too much detergent was added and it overflowed, or water splashed on the washer while cleaning it
First Thing to Check
Check if detergent, fabric softener, or bleach overflowed from the dispenser — reduce the amount next time
Parts Involved
How to Fix
- 1
1. Make sure the drain hose is not clogged
- 2
2. Make sure the end of the drain hose is placed on the floor
- 3
3. Check if the detergent/softener/bleach has overflowed the detergent case
- 4
4. Check if the exterior of the upper washer is cleaned with water
- 5
5. If the information code remains, contact a customer service center
This Error Applies To
Samsung WV55M9600A Series Washers (2024) (2024–present)
Related Error Codes
The washer is getting too much electrical power
The washer cannot detect the water level properly
The washer's motor cannot spin or is struggling to turn
The washer is not getting water
The incoming water is too hot for delicate wash cycles
The washer cannot pump the water out
The washer is not getting enough electrical power
The top and bottom washers cannot communicate with each other