Error Code 6C6
The sensor that measures how much detergent is left has failed.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 6C6
What This Means
Detergent level perception sensor fault
What actually causes this:
The sensor that checks the detergent level in the auto-dispense reservoir has failed or gotten coated with residue.
First Thing to Check
Remove and thoroughly clean the auto-dispense detergent reservoir, then reinsert it.
Parts Involved
How to Fix
- 1
1. Check wire connections to the level sensor
- 2
2. If necessary, replace the ASSY PUMP assembly
This Error Applies To
Samsung WW22N6850QX Series Washers (2018) (2018–present)
Related Error Codes
The incoming water is too hot for the selected delicate cycle.
The main board and motor inverter have lost communication.
The sensor that measures how much fabric softener is left has failed.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer is not getting water or not getting enough water.
The washer cannot pump the water out.