Error Code E-22
Temperature sensor wires are shorted together
Moderate
Address soon - your appliance may not work properly
Also displayed as: E-22
What This Means
Sensor harness short circuit; Oven sensor internal short; Connector pins touching (CN201 main PCB or CN02 sub PCB); Moisture damage to sensor harness
What actually causes this:
Moisture, damaged harness, or sensor failure
First Thing to Check
Measure sensor resistance - should be 1000 ohms; under 100 ohms is shorted
Parts Involved
How to Fix
- 1
Check whether connector (CN201) of main PCB has been inserted properly
- 2
Check whether connector (CN02) of sub PCB has been inserted properly
- 3
Measure oven sensor resistance - should be ~1000Ω at room temperature
- 4
Inspect harness for moisture or damage
- 5
Check connector pin spacing for bending/contact
Other Error Codes for NE58F9710WS
Main and sub control boards cannot communicate
Keypad circuit short detected
Meat probe is shorted or has short circuit
Keypad has a short circuit
Oven partition divider switch is not responding
Oven temperature is dangerously high
Door lock mechanism is not responding
Touch control panel is not communicating with sub board