Error Code -SE-
Keypad circuit short detected
Moderate
Address soon - your appliance may not work properly
Also displayed as: -SE-
What This Means
Keypad cable not inserted into sub PCB connector; Short circuit between sub PCB connector and keypad cable pins; Keypad cable damaged or shorted; Sub PCB connector pins touching
What actually causes this:
Broken keypad cable insulation causing shorts, or damaged connector pins
First Thing to Check
Verify keypad cable is fully inserted into sub PCB connector TE201 with no pin bending
Parts Involved
How to Fix
- 1
Disconnect power
- 2
Check whether cable of keypad has been inserted into connector of sub PCB
- 3
Check for short circuit between sub PCB and connector or keypad and cable
- 4
Inspect connector pins for bending or contact
Other Error Codes for NE58K9500SG
Main and sub control boards cannot communicate
Meat probe is shorted or has short circuit
Keypad has a short circuit
Temperature sensor wires are shorted together
Oven partition divider switch is not responding
Oven temperature is dangerously high
Door lock mechanism is not responding
Touch control panel is not communicating with sub board