Error Code E-83
Main and sub control boards cannot communicate
Moderate
Address soon - your appliance may not work properly
Also displayed as: E-83
What This Means
Connector (CN201) of main PCB not inserted; Connector (CN02) of sub PCB not inserted; Short circuit between connector pins on Main PCB or Sub PCB; Harness damage or disconnection; PCB pattern damage
What actually causes this:
Loose connector, damaged harness, or PCB failure
First Thing to Check
Check CN201 on main PCB and CN02 on sub PCB are fully seated
Parts Involved
How to Fix
- 1
Disconnect power
- 2
Check whether connector (CN201) of main PCB has been inserted
- 3
Check whether connector (CN02) of sub PCB has been inserted
- 4
Check for short circuit between connector pins on both PCBs
- 5
Inspect harness connections visually
Other Error Codes for NE58K9500SG
Keypad circuit short detected
Meat probe is shorted or has short circuit
Keypad has a short circuit
Temperature sensor wires are shorted together
Oven partition divider switch is not responding
Oven temperature is dangerously high
Door lock mechanism is not responding
Touch control panel is not communicating with sub board