Error Code E-08
Oven temperature rises too slowly — fails to reach 125 degrees F (52 degrees C) within 10 minutes at room temperature
Moderate
Address soon - your appliance may not work properly
What This Means
Oven fails to reach 125°F (52°C) within 10 minutes at room temperature; Faulty oven temperature sensor; Defective bake or broil burner; Incorrect orifice sizing for gas type
How to Fix
- 1
Measure the oven temperature sensor resistance - should be 1080 ohms at room temperature
- 2
Replace faulty oven temperature sensor if reading is incorrect
- 3
Check harness connections at the PCB terminals (T02, T03) for looseness or disconnection
- 4
Repair or replace damaged harness
- 5
Verify broil and bake burners have been adjusted properly
- 6
Check oven burner orifices are sized properly for the type of gas being used
- 7
Open or close the air shutter at the base of the burners to optimize the flame pattern
- 8
Replace with properly sized orifices if incorrect
Other Error Codes for NX58J5600SG
Shorted key — keypad has been pressed continuously for 10 minutes
Oven temperature sensor open (resistance over 2950 ohms)
Shorted key - Control panel membrane keypad pressed for 10 minutes
Door locking error — door lock is in the wrong position after 1 minute
Oven temperature sensor shorted (resistance under 930 ohms)
Oven overheating error — oven temperature reaches 650 degrees F (343 degrees C) in any cooking function except Self Clean