Error Code E Lis
Humidity Sensor Abnormal — Room humidity sensor short or open (optional feature)
Moderate
Address soon - your appliance may not work properly
Also displayed as: E Lis
How to Fix
- 1
Check humidity sensor connector for loose or disconnected condition.
- 2
If connector is loose/disconnected, reconnect or repair the connector.
- 3
Measure humidity sensor resistance; if short (0 ohm) or open, replace sensor.
- 4
If sensor tests good, replace Main PCB.
Other Error Codes for LRSOC2306W
UV/Nano LED Module Error — Bad UV LED module or poor connection of display and UV module; caused when feedback signals are abnormal (OPTIONAL feature)
Water Tank Switch Error — Water tank not assembled correctly or water tank switch error (optional feature)
Freezer Sensor Abnormal — Freezer sensor short or open failure
Defrost Heater Abnormal — Defrost heater or thermal fuse short circuit or unplugged connector. Indicated 4 hours after trouble occurs.
Refrigerator Sensor Abnormal — Refrigerator sensor (upper part of refrigerator compartment) short or open failure
Defrost Sensor Abnormal — Defrost sensor short or open failure
Freezer Fan Motor Abnormal — Connection line of the fan motor is faulty, short or open. Display fault when operating fan motor for 65 seconds without feedback.
Ambient (Room) Temperature Sensor Abnormal — Room temperature sensor short or open