Error Code 20c
Cocktail ice maker sensor is not working properly
Moderate
Address soon - your appliance may not work properly
Also displayed as: 20c
What This Means
Sensor housing slipped out; Wire cut or damaged; Wire short circuit; Temperature reading outside -50°C to +50°C range
What actually causes this:
Cocktail ice maker sensor wiring became loose or sensor failed
First Thing to Check
Verify the cocktail ice maker sensor connector is firmly attached
Parts Involved
How to Fix
- 1
1. Check voltage between Case Connector DC WHT #2 ↔ #3
- 2
2. Voltage should be within 4.5V~1.0V
- 3
3. Inspect sensor housing for displacement
- 4
4. Check wiring for cuts or damage
Other Error Codes for BRF365200AP
Refrigerator defrost sensor is not reading temperature correctly
Pantry fan is not working properly
Outside humidity sensor is not reading correctly
Refrigerator fan is not working properly
The main control board and inverter board are not communicating
Condenser fan is not working properly
Refrigerator temperature is too warm
Ice maker is not making ice properly