Error Code 111E
The nugget ice maker's temperature sensor is not reading correctly
Moderate
Address soon - your appliance may not work properly
Also displayed as: 111E
What This Means
Sensor housing separation; Incomplete contact at connector; Open-circuited wire; Short-circuit
What actually causes this:
Sensor connector CN90 loosened during ice maker removal
First Thing to Check
Check and reseat connector CN90 on the Main PCB
Parts Involved
How to Fix
- 1
Check voltage between Main PCB CN90 pins 14 and 24 — should be within 4.5V to 1.0V range
- 2
Inspect sensor connector and wire harness
Other Error Codes for RF23A9771SR
The power coming into the refrigerator is dangerously high
The heater that prevents condensation on the showcase door panel has an open circuit
The power coming into the refrigerator is too low for the compressor to run
The second ice supply line heater has an open circuit
Freezer temperature sensor is reading an impossible value
Fridge compartment sensor is detecting an impossible temperature
Freezer defrost sensor is reading outside its valid range
Outside ambient temperature sensor has failed or lost connection