Error Code 9C
FlexZone compartment sensor out of valid range
Moderate
Address soon - your appliance may not work properly
Also displayed as: 9C
What This Means
Sensor housing separated; Incomplete connector contact; Open-circuited wire; Short-circuit
What actually causes this:
Sensor connector loose or thermistor failed inside the FlexZone evaporator area.
First Thing to Check
Inspect the FlexZone evaporator cover area for a loose sensor connector.
Parts Involved
How to Fix
- 1
Check voltage between Main PCB CN40 pins 14 and 16; should be within 4.5V–1.0V range
- 2
Inspect sensor connector in the Flex Room compartment
- 3
Replace sensor if out of range
Other Error Codes for RF23CB99008MAC
Door showcase heater has an open or short circuit fault
Ice Bites ice maker temperature sensor reading invalid
Internal I/O expander chip on Main PCB has lost communication
Ambient air temperature sensor reading invalid
Freezer defrost sensor reading out of valid range
Freezer evaporator fan not running or not sending feedback signal
Flex Crisper compartment sensor out of valid range
Fridge compartment defrost sensor reading out of valid range