Error Code ㉖
The freezer ice maker module isn't initializing
Moderate
Address soon - your appliance may not work properly
Also displayed as: LED blinks in self-diagnostic checklist position 26
What This Means
New ice maker module not properly installed; Ice maker connector not fully seated; Ice maker module defective; Main PBA defect or needs reprogramming
What actually causes this:
The new ice maker wasn't installed correctly or the connection is loose
First Thing to Check
Make sure the ice maker connector is fully pushed into the socket
Parts Involved
How to Fix
- 1
1. Verify ice maker (FZ) is securely installed in freezer
- 2
2. Check connector CN90 security at ice maker — fully seat connector
- 3
3. Unplug refrigerator power cord for 30 seconds
- 4
4. Plug refrigerator power code back in and wait 1 minute
- 5
5. Check if error clears after ice maker initializes
Other Error Codes for RF23R6201BZ
The main board's input/output controller isn't responding
The freezer temperature sensor isn't reading correctly
The outside temperature sensor isn't reading correctly
The refrigerator temperature sensor isn't reading correctly
The refrigerator ice room heater isn't warming up
The Cool Select Pantry temperature sensor isn't working
The ice room temperature sensor isn't reading correctly
The ice room cooling fan isn't running