Error Code 13
Refrigerator cannot detect internal humidity levels
Moderate
Address soon - your appliance may not work properly
Also displayed as: 13
What This Means
Loose connector at CN30-3 or CN76-1; Damaged humidity sensor; PCB solder joint failure; Moisture damage to sensor
What actually causes this:
Humidity sensor exposed to moisture or connector corroded
First Thing to Check
Look for the humidity sensor connector and ensure it is fully inserted
Parts Involved
How to Fix
- 1
Check voltage between Main PCB CN30-3 and CN76-1
- 2
Expected voltage range: 4.1V to 0.8V (different from temperature sensors)
- 3
Verify connector is fully seated
- 4
Check for moisture on sensor
Other Error Codes for RF265BEA
Freezer defrost cycle cannot detect when ice buildup has melted
Compressor motor is not spinning and cooling system cannot function
Refrigerator defrost cycle cannot detect when ice has melted
Compressor cannot receive control signals and may not operate
Freezer is warmer than it should be and food may spoil
Compressor cannot operate due to power delivery system fault
Refrigerator voltage is too high and internal components may be damaged
Freezer temperature cannot be measured or controlled