Error Code 7
Pantry drawer temperature cannot be monitored or controlled
Moderate
Address soon - your appliance may not work properly
Also displayed as: 7
What This Means
Loose connector at CN30-9 or CN76-1; Damaged thermistor; PCB solder joint failure; Broken sensor wiring
What actually causes this:
Pantry sensor connector came loose or sensor element failed
First Thing to Check
Check the pantry compartment sensor connection on the main board
Parts Involved
How to Fix
- 1
Check voltage between Main PCB CN30-9 and CN76-1
- 2
Expected voltage range: 4.5V to 1.0V
- 3
Verify connector seating
- 4
Check sensor leads for continuity
Other Error Codes for RF265BEA
Freezer defrost cycle cannot detect when ice buildup has melted
Compressor motor is not spinning and cooling system cannot function
Refrigerator defrost cycle cannot detect when ice has melted
Compressor cannot receive control signals and may not operate
Freezer is warmer than it should be and food may spoil
Compressor cannot operate due to power delivery system fault
Refrigerator voltage is too high and internal components may be damaged
Refrigerator cannot detect internal humidity levels