Error Code 13E
Humidity level sensor malfunction
Minor
Usually easy to fix - may resolve on its own
Also displayed as: 13 E
What This Means
Separation of sensor housing part; Contact error; Disconnection; Short circuit
What actually causes this:
The humidity sensor connector came loose or the sensor itself failed.
First Thing to Check
Locate the humidity sensor connector and reseat it firmly.
Parts Involved
How to Fix
- 1
Measure voltage between MAIN PCB CN30 #7 and #9
- 2
Voltage should be within range 4.5V to 1.0V
- 3
Check sensor pin #1-#2 voltage approximately 5V
- 4
Check output voltage on pin #3 approximately 1-4V
Other Error Codes for RS25H5111BC
Ice maker position sensor out of sync
Refrigerator defrost heating system malfunction
Refrigerator compartment warming up abnormally
Room temperature sensor malfunction
Compressor motor won't start
Refrigerator defrost temperature sensor malfunction
Freezer compartment fan motor not responding
Freezer defrost heating system malfunction