Error Code PE
The clutch that switches between wash and spin modes is not working
Moderate
Address soon - your appliance may not work properly
Also displayed as: PE
What This Means
Clutch motor fault; Incorrect assembly of the clutch motor; Wire connector terminal fault
What actually causes this:
The clutch motor that controls the wash-to-spin transition has failed or come loose
First Thing to Check
Unplug the washer for 5 minutes and restart — if the error returns, it needs service
Parts Involved
How to Fix
- 1
1. Check the clutch motor operation
- 2
2. Check the assembly status of the clutch motor
- 3
3. Check the wire connector terminals for loose connections
- 4
4. Verify the clutch motor receives power and the position detection signal returns within 15 seconds
Other Error Codes for WA48H7400AP
The hot and cold water hoses are connected to the wrong faucets
The washer lid is stuck and will not unlock
The washer lid is not closing or latching properly
The water temperature sensor is giving incorrect readings
The washer motor is not spinning or not being detected
The two circuit boards inside the washer cannot talk to each other
The vibration sensor inside the washer is malfunctioning
A control button appears to be stuck or the main relay has a fault