Error Code PE1
Too many soap suds are interfering with the washer's clutch mechanism
Moderate
Address soon - your appliance may not work properly
Also displayed as: PE1
What This Means
Too much detergent used; Wrong type of detergent (non-HE); Excessive suds interfering with clutch operation
What actually causes this:
Too much detergent was used, and the foam is preventing the washer from switching between wash and spin properly
First Thing to Check
Let the washer finish its cycle — it will try to rinse out the extra suds
Parts Involved
How to Fix
- 1
1. Guide the user to reduce the amount of detergent usage
- 2
2. Ensure HE (High Efficiency) detergent is being used
- 3
3. Run a Self Clean cycle to remove detergent buildup
Other Error Codes for WA48H7400AP
The hot and cold water hoses are connected to the wrong faucets
The washer lid is stuck and will not unlock
The washer lid is not closing or latching properly
The water temperature sensor is giving incorrect readings
The washer motor is not spinning or not being detected
The two circuit boards inside the washer cannot talk to each other
The vibration sensor inside the washer is malfunctioning
A control button appears to be stuck or the main relay has a fault