Error Code LE
Water is leaking from the washer during a cycle
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: LE
What This Means
Fault of a hose or incorrect part in the product; Foreign material in the DV case or drain bellows clogged; Water level sensor not operating normally; Water leakage from base, Hose, Valve, and Tub connections
What actually causes this:
A hose connection came loose or the drain bellows has a tear, letting water escape during washing
First Thing to Check
Check around and under the washer for any visible water puddles — turn off the washer and water supply immediately
Parts Involved
How to Fix
- 1
1. Check for any leakage on the base, Hose, Valve, and Tub connections and take any required action
- 2
2. Check for foreign material in the DV case — remove the foreign material
- 3
3. Check the drain motor operation — if it does not operate normally, replace it
- 4
4. If the water level sensor has a functional error, replace it
- 5
5. Check the hose — this error occurs if it is torn or has a hole
Other Error Codes for WA48H7400AW
The hot and cold water hoses are connected to the wrong faucets
The washer lid is stuck and will not unlock
The washer lid is not closing or latching properly
The water temperature sensor is giving incorrect readings
The washer motor is not spinning or not being detected
The two circuit boards inside the washer cannot talk to each other
The vibration sensor inside the washer is malfunctioning
A control button appears to be stuck or the main relay has a fault