Error Code OE
The washer detected too much water and is trying to drain
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OE
What This Means
Water level sensor fault (torn hose or hole); Freezing in the winter season; Water supply valve stuck open
What actually causes this:
A water inlet valve is stuck open, letting water continuously flow into the washer
First Thing to Check
Turn off both water faucets behind the washer immediately to stop water flow
Parts Involved
How to Fix
- 1
1. First check to see that all water valves are not stuck open
- 2
2. If water valves are OK, check water level sensor operation
- 3
3. Check the hose — this error occurs if it is torn or has a hole
- 4
4. If the water level sensor has a functional error, replace it
- 5
5. In winter, check if water is frozen in the season — use a hair dryer to defrost the hose and consider relocating the unit to a warmer location
Other Error Codes for WA48H7400AW
The hot and cold water hoses are connected to the wrong faucets
The washer lid is stuck and will not unlock
The washer lid is not closing or latching properly
The water temperature sensor is giving incorrect readings
The washer motor is not spinning or not being detected
The two circuit boards inside the washer cannot talk to each other
The vibration sensor inside the washer is malfunctioning
A control button appears to be stuck or the main relay has a fault