Error Code dC
The washer thinks the lid is open.
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC
What This Means
Door/lid not properly closed; Laundry caught in the door; Debris build-up in the door lock tray; Door switch defective; Main PCB door detection circuit defective
What actually causes this:
The lid is not fully closed, or a piece of clothing is caught between the lid and the tub, preventing a proper seal.
First Thing to Check
Open the lid, make sure nothing is caught in it, close it firmly, and try again.
Parts Involved
How to Fix
- 1
1. Check if the door is opened or closed. Ensure door is closed all the way with no laundry caught.
- 2
2. Check for debris in the door lock tray. Clean with a damp, soft cloth.
- 3
3. Check Reed SW resistance (White-Green Wire): approx 0.2 ohms between terminals.
- 4
4. Since 120V power is connected, check if power is disconnected before servicing the door switch.
- 5
5. Check Door Lock Motor resistance (Black-Brown Wire): 33 to 46 ohms between terminals.
- 6
6. If the main PBA door detection circuit is defective, replace it.
Other Error Codes for WA52DG5500AVUS
The water level sensor is not reading correctly.
The washer cannot pump the water out.
The washer's vibration sensor is not working.
The washer is getting too much voltage from the outlet.
The washer's control boards cannot talk to each other.
The door lock mechanism is not working correctly.
The door lock cannot release to let you open the lid.
The washer motor is not running properly.