Error Code 8C
Your washer's vibration sensor board has a fault.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C
What This Means
Main PBA wire connection check; PBA silver nano part malfunction; MEMS PBA is defective; Water level sensor is defective
What actually causes this:
The MEMS vibration sensor board has failed or has a loose wire connection.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check wire connections for disconnection
- 2
2. Replace the MEMS PBA
- 3
3. Check Main PBA wire connection or PBA silver nano part malfunction — replace if necessary
Other Error Codes for WA52J8700AP
Your washer cannot detect the position of its internal clutch.
Your washer's main computer chip has failed.
Your washer's vibration sensor has detected a data error.
Your washer's water heating element has a specific fault.
Your washer's drying heater has a specific fault.
Your washer's vibration sensor board has failed.
Your washer's motor speed controller has lost connection to the main board.
Your washer's internal input/output board has lost connection.