Error Code 8C1
Your washer's vibration sensor has detected a data error.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C1
What This Means
Check detected in the MEMS PBA; Data check detected; Wire connection issues
What actually causes this:
The vibration sensor board has a loose connection or is malfunctioning.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the wire connections
- 2
2. Replace the MEMS PBA if necessary
Other Error Codes for WA52J8700AP
Your washer's vibration sensor board has a fault.
Your washer cannot detect the position of its internal clutch.
Your washer's main computer chip has failed.
Your washer's water heating element has a specific fault.
Your washer's drying heater has a specific fault.
Your washer's vibration sensor board has failed.
Your washer's motor speed controller has lost connection to the main board.
Your washer's internal input/output board has lost connection.