Error Code 8C2
Your washer's vibration sensor board has failed.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C2
What This Means
MEMS PBA sensor fault; Wire disconnection
What actually causes this:
The vibration sensor board has failed and needs replacement.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the wire connections
- 2
2. Replace the MEMS PBA
- 3
3. Check Main PBA wire connection or PBA silver nano part malfunction — replace if necessary
Other Error Codes for WA52J8700AP
Your washer's vibration sensor board has a fault.
Your washer cannot detect the position of its internal clutch.
Your washer's main computer chip has failed.
Your washer's vibration sensor has detected a data error.
Your washer's water heating element has a specific fault.
Your washer's drying heater has a specific fault.
Your washer's motor speed controller has lost connection to the main board.
Your washer's internal input/output board has lost connection.