Error Code dS
The washer door isn't closing or latching properly
Moderate
Address soon - your appliance may not work properly
Also displayed as: dS
What This Means
Switch contact error because of deformation of the door hook; Door opened after starting operation; Door pulled by force during operation
What actually causes this:
The door was opened or pulled during a wash cycle, or the door latch is bent
First Thing to Check
Close the lid firmly until you hear it click and restart the cycle
Parts Involved
How to Fix
- 1
1. Check the resistance for the Reed SW — checking part: White-Green Wire, resistance approx. 0.2 ohms
- 2
2. In state of Door Close, check Reed SW — check between terminals of Reed SW
- 3
3. Check the Door-Lock SW terminal connections and contacts
Other Error Codes for WA5471ABP
The washer's motor can't spin properly
The washer can't detect the water level inside the tub
The washer isn't filling with water properly
The washer's control boards can't communicate with each other
The washer's lid won't unlock after the cycle
The washer's lid won't lock to start the cycle
The washer's water heating element has a problem
A temperature sensor in the washer is not reading correctly