Error Code PE
The washer's clutch mechanism can't find its position
Moderate
Address soon - your appliance may not work properly
Also displayed as: PE
What This Means
Clutch motor coil cut or break; Clutch motor housing connection issue; Foreign materials at clutch motor restraining revolutions; Clutch motor housing disconnection; Coupling assembly/disassembly issue
What actually causes this:
The clutch motor that switches between wash and spin modes has failed or gotten jammed
First Thing to Check
Unplug the washer for 2 minutes, then plug it back in and try again
Parts Involved
How to Fix
- 1
1. Check the clutch motor
- 2
2. Check the assembly status of the clutch motor
- 3
3. Check the wire connector terminals
- 4
4. Check the clutch motor resistance between terminals 1 and 3 of the clutch motor housing: 2.18 kohms at 20°C (plus or minus 7%)
- 5
5. Check whether the revolution of the clutch motor is restrained by foreign material — remove it directly
- 6
6. Check the connection of the clutch motor housing
Other Error Codes for WA5471ABW
The washer's motor can't spin properly
The washer can't detect the water level inside the tub
The washer isn't filling with water properly
The washer's control boards can't communicate with each other
The washer's lid won't unlock after the cycle
The washer's lid won't lock to start the cycle
The washer's water heating element has a problem
A temperature sensor in the washer is not reading correctly