Error Code bE
Your washer detected a problem with its motor sensor.
Moderate
Address soon - your appliance may not work properly
Also displayed as: bE
What This Means
IPM terminal of main PBA is not connected; DD motor cover is out of place; PCB housing terminal is not connected; PBA fault; DD motor fault
What actually causes this:
Usually a loose electrical connection inside the machine or the motor cover shifted out of position.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the motor stator whether the cover is damaged
- 2
2. Check the motor connector and sensor connector
- 3
3. Check for washing motor rotor and stator fault
- 4
4. Check for coil disconnections due to foreign material
- 5
5. If Main PCB fault, replace the PBA
Other Error Codes for WF42H5000AW
Your washer's motor cannot spin the drum.
The control boards inside your washer are not communicating.
Your washer is not getting enough water.
Your washer lost power briefly during a cycle.
A button on your washer's control panel appears stuck.
Your washer detected a problem with its water heating system.
Your washer thinks the door is not closing properly.
Your washer is overfilling with water.