Error Code FL
Your washer door will not lock to start a cycle.
Moderate
Address soon - your appliance may not work properly
Also displayed as: FL
What This Means
Door lock switch terminal is connected incorrectly; Door lock switch terminal is broken; Intermittent electric wire leakage; Main PCB fault; Drain pump fault; Dry duct fan motor fault
What actually causes this:
The door latch mechanism is not engaging properly, often because something is blocking the door from fully closing.
First Thing to Check
Check that nothing (clothing, detergent buildup) is caught in the door seal preventing the door from closing completely.
Parts Involved
How to Fix
- 1
1. Check and repair the power wire connections and insulation state
- 2
2. Check the door switch — replace if faulty
- 3
3. Check the main PBA door sensing circuit — replace if faulty
- 4
4. Check the door lock switch resistance: pins 3 and 5 must be approximately 949Ω
Other Error Codes for WF42H5000AW
Your washer's motor cannot spin the drum.
The control boards inside your washer are not communicating.
Your washer is not getting enough water.
Your washer lost power briefly during a cycle.
A button on your washer's control panel appears stuck.
Your washer detected a problem with its water heating system.
Your washer thinks the door is not closing properly.
Your washer is overfilling with water.