Error Code LE
Your washer cannot detect the water level properly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: LE
What This Means
Water level sensor hose is damaged (punctured); Hose is clogged with foreign material; Hose is folded; Too much lubricant applied to air hose insertion part; Hose engagement error (disengaged); Part fault (faulty internal soldering); Water level sensor terminal is disengaged; Main PBA fault; PBA connector terminal is not connected
What actually causes this:
Usually the small rubber hose connected to the water level sensor has come loose, gotten kinked, or has a hole in it.
First Thing to Check
Open the top panel and look for a small rubber hose near the top — make sure it is not kinked, cracked, or disconnected.
Parts Involved
How to Fix
- 1
1. Check the water level sensor terminal connections and contacts
- 2
2. Check the water level sensor frequency — Approximate frequency: 26.4 KHz with no load
- 3
3. Check if the hose part for the water level sensor operation is connected and the connector and sensor terminal are correctly connected
- 4
4. If the water level sensor is faulty, replace it
- 5
5. If error persists despite taking above action, replace the PBA (Main PCB fault)
Other Error Codes for WF42H5000AW
Your washer's motor cannot spin the drum.
The control boards inside your washer are not communicating.
Your washer is not getting enough water.
Your washer lost power briefly during a cycle.
A button on your washer's control panel appears stuck.
Your washer detected a problem with its water heating system.
Your washer thinks the door is not closing properly.
Your washer is overfilling with water.