Error Code SUd
There are too many soap suds in your washer
Moderate
Address soon - your appliance may not work properly
Also displayed as: SUd or SUdS
What This Means
Too much detergent used; Non-HE (high efficiency) detergent used; Detergent not suitable for front-loading washer
What actually causes this:
Too much detergent was used, or regular (non-HE) detergent was used instead of high-efficiency detergent
First Thing to Check
Wait for the washer to finish removing the suds — it will restart on its own
How to Fix
- 1
1. Wait — the washer will automatically attempt to remove the foam
- 2
2. 'End' is displayed when foam removal is finished
- 3
3. If it recurs, reduce detergent amount in future loads
- 4
4. Ensure HE (high efficiency) detergent is being used
Other Error Codes for WF42H5200AP
The WiFi module in your washer lost its connection to the main board
The control panels inside your washer aren't communicating with each other
The display panel lost its connection to the main control board
One of the buttons on your washer is stuck
The water heater in your washer isn't working properly
Your washer door isn't closing or locking properly
The washer motor is struggling to spin the drum
The incoming water is too hot for the selected cycle