Error Code nF
Wi-Fi module abnormal. Displayed in test mode only.
Moderate
Address soon - your appliance may not work properly
Also displayed as: nF
What This Means
Wi-Fi module failure
How to Fix
- 1
Confirm nF in diagnostic test mode
- 2
Check Wi-Fi module connector on main PCB for loose connection
- 3
Reseat connector; power cycle dryer
- 4
If fault persists, replace Wi-Fi module or main PCB
Other Error Codes for DLEX5000W
Humidity sensor failure.
Steam generator thermistor open or shorted. Displayed in test mode only.
EEPROM operation abnormal. Displayed in test mode only.
Water supply pump AD value below 10 in test mode — pump failure or wiring fault.
Modem is abnormal. Displayed in test mode only.
Steam generator thermistor error — displayed in test mode only.
FlowSense duct restriction at approximately 80% blockage — displayed after drying cycle.
FlowSense duct blockage at approximately 95% — critically restricted. Error displayed for 2 hours.