Error Code nE
Modem is abnormal. Displayed in test mode only.
Moderate
Address soon - your appliance may not work properly
Also displayed as: nE
What This Means
Modem module failure
How to Fix
- 1
Confirm nE in diagnostic test mode
- 2
Check modem module connector for loose connection
- 3
Reseat connector; power cycle dryer
- 4
If fault persists, replace modem module or main PCB
Other Error Codes for DLGX5001V
Humidity sensor failure.
Wi-Fi module abnormal. Displayed in test mode only.
Steam generator thermistor open or shorted. Displayed in test mode only.
EEPROM operation abnormal. Displayed in test mode only.
Water supply pump AD value below 10 in test mode — pump failure or wiring fault.
Steam generator thermistor error — displayed in test mode only.
FlowSense duct restriction at approximately 80% blockage — displayed after drying cycle.
FlowSense duct blockage at approximately 95% — critically restricted. Error displayed for 2 hours.