Error Code d95
FlowSense duct blockage 95% — ductwork approximately 95% blocked. Error displayed for 2 hours only.
Moderate
Address soon - your appliance may not work properly
What This Means
Ductwork nearly completely blocked by lint or debris; Vent hood crushed or completely obstructed
How to Fix
- 1
Do not use dryer — immediate fire risk
- 2
Replace or thoroughly clean entire exhaust duct system
- 3
Inspect and clear vent hood; replace if damaged
- 4
After repair, perform installation duct check (Power + Low Static + Options, then Start) to confirm clearing
- 5
Verify adequate airflow at exterior vent before resuming operation
Other Error Codes for DLGX6701W
Temperature sensor error 1 — outlet thermistor at blower housing is open or shorted. Displayed during drying cycle or test mode.
Steam water supply error — DC pump AD value is less than 10 in diagnostic test mode.
FlowSense duct blockage 80% — ductwork approximately 80% blocked. Error displayed for 2 hours only.
Temperature sensor error 2 — outlet thermistor at blower housing is open or shorted. Displayed during drying cycle or test mode.
Door open or door switch abnormal. During normal operation displays when door is opened mid-cycle. In test mode indicates door switch fault.
Steam generator thermistor open or shorted. Displayed only in diagnostic test mode.
FlowSense duct blockage 90% — ductwork approximately 90% blocked. Error displayed for 2 hours only.