How do I fix error code EE on a LG dryers?

1. undefined: Enter diagnostic test mode. 2. undefined: If EE is displayed, the main PCB EEPROM has failed. 3. undefined: Replace the main PCB assembly. 4. undefined: After replacement, verify all functions work correctly in diagnostic test mode.

LG Dryers

Error Code EE

EE PROM (non-volatile memory) operation is abnormal

Moderate

Address soon - your appliance may not work properly

Also displayed as: EE

How to Fix

1
Enter diagnostic test mode.
2
If EE is displayed, the main PCB EEPROM has failed.
3
Replace the main PCB assembly.
4
After replacement, verify all functions work correctly in diagnostic test mode.

This Error Applies To

LG DLEX4200B Series Dryers

Service manual exact match: DLGX4201BService manual exact match: DLEX4000VService manual exact match: DLGX4001WService manual exact match: DLG3601BService manual exact match: DLEX4200BService manual exact match: DLGX4201VService manual exact match: DLEX4000WService manual exact match: DLE3600B+2 more

Related Error Codes

No power / power supply issue - electric dryer power cord not connected or house power supply incorrect

tE5

Steam water supply pump failure detected in test mode

tE2

Thermistor of blower housing - Outlet thermistor open or shorted

Power supply wire connection wrong or loose (Black-White-Red)

NFC module open or shorted

d80

Exhaust ductwork approximately 80% blocked - FlowSense alert

Power failure - house fuse blown or circuit breaker tripped, or power outage occurred

NFC module type is wrong

Need more help with your LG dryers?