Error Code tE2

Outlet thermistor (blower housing) open or shorted — Temperature sensor error 2. Displayed during drying cycle or test mode.

Also displayed as: tE2

What This Means

Outlet thermistor open or shorted (secondary check); Harness wiring fault; Defective main PCB

How to Fix

1. 1

   Follow the same procedure as tE1

2. 2

   Turn off power and discharge voltage before measuring

3. 3

   Remove NA6 connector from controller and short pin 2 (Blue) and pin 3 (Orange)

4. 4

   If fault clears with pins shorted, check harness connections and reconnect, or replace controller if still faulty

5. 5

   If fault persists with pins shorted, measure thermistor resistance and compare to Table 1 temperature-resistance chart

6. 6

   Replace thermistor if out of specification

7. 7

   If thermistor measures correctly, inspect harness-linking connector for damage or poor contact

This Error Applies To

LG DLEX5000V Series Dryers (2017) (2017–present)